BCT manufactures composite cored panels using various core materials, solid laminate sheets, and tooling boards to customer laminate specifications. One piece panels are pressed at 4' x 40' and then cut into the customer's optimal sheet size without custom pricing!

Features:

  • Custom laminate schedules according to customer specified requirements. The customer specifies ply materials and fiber orientation (0, 90, +45, -45, ect.) providing almost infinite permutations.
    Don't buy what is available, buy what you need!
  • Panels are laminated to yield 4 feet by 40 feet, from which the customer specifies its cutting.
    This availability can create tremendous cost savings if used to minimize waste. Don't buy 8' panels if your optimal size is 6' !
  • Panels are cured under 28 inches hg and at 250F using BCT's proprietary computer controlled heated vacuum press.
Options:
  • Peel ply finish for secondary bonding
  • Nested core lay-outs, where the body of a panel might be honeycomb and where the trimmed edges might be foam cored.
  • Complex CNC cutting and milling of panel when DXF files are provided by the customer.

 

COMPOSITE CORED PANELS

660 gsm carbon skin on 3/8" cell aluminum honeycombBCT manufactures sandwich cored prepreg panels to the customer's laminate and size specifications.

Features

  • The customer designs the laminate to their specific requirements.
  • Standard panels have a tg of 250F.
  • Customer created laminate schedule including fiber orientation
  • Customer specified cutting of panel to optimum required sizes, so as to minimize waste
  • Large size availability (up to 40' long)
Options
  • Peel ply finish for secondary bonding.
  • Nested core lay-outs, where the body of a panel might be honeycomb and where the trimmed edges might be foam cored.
  • Complex CNC cutting and milling of panel when DXF files are provided by the customer.

SOLID LAMINATE SHEETS

Solid carbon fiber sheet machined into butterfly valves for outboard engines.BCT manufactures solid laminate prepreg sheets to the customer's laminate schedule and size specifications.

Features

  • The customer designs the laminate to their specific requirements.
  • Standard solid laminations have a tg of 250F.
  • Customer created laminate schedule including fiber orientation
  • Customer specified cutting of panel to optimum required sizes, so as to minimize waste
  • Large size availability (up to 40' long)

Options

  • Peel ply finish for secondary bonding.
  • Complex CNC cutting and milling of panel when DXF files are provided by the customer.
Home

Copyright © 2006 Beaufort Composite Technologies, Inc.
This site is best viewed with a minimum screen resolution of 1024x768
Send mail to webmaster@composites.com with questions or comments about this web site.